C-Guard® systems


C-Guard® Industrial


  • Easy maintenance
  • Not slippery when wet
  • Silky matt look
  • Water vapour permeable
  • High mechanical resistance
  • Excellent temperature resistance (up to 130 °C)
  • Good UV resistance
  • Free of solvents, plasticizers and benzyl alcohol
  • No emissions
  • Environmentally friendly solution
Technical features

C-Guard® MCF Industrial is a special-purpose concrete flooring protection system that enables the same composition throughout the whole volume. It is made from environmentally friendly raw materials, free of solvents, plasticizers or benzyl alcohol and therefore does not cause emissions. It is suitable for most production and storage facilities. The system is characterized by easy maintenance of surface appearance. It has a silky matie appearance and has many advantages over classic solvent free solutions. The MCF Industrial is much less slippery when wet and is well suited for use with poor floor hydro insulation as its vapour permeability allows it to breathe. At the same time it is a complete closure for liquids. MCF is extremely high mechanical and temperature resistance (130°C) and very good in chemical and UV resistance.

Layer Product
Thickness 1,5-2 mm
Substrate Concrete prepared according to standards
Primer C-Guard® EP 270W + 20% water
Intermediate C-Guard® EP 270W + sand
Final layer C-Guard® EP 385W
Optional C-Guard® EP 272W HT or PU 220W CL or PU 222W AG


Production, warehouse


  • Easy maintenance
  • Glossy look
  • Versatile use
  • Easy to install
  • Superb levelling
  • Highly decorative
Technical features

C-Guard® CSF Industrial is a two-component, thick, colored, solvent-free, epoxy system. Due to its low viscosity and high coverage the system is very flexible. It is suitable for application with a roller or trowel. It is mainly used for cement-bound, ceramic substrates, substrates made of cast asphalt, which are mechanically and chemically heavily loaded such as warehouses, production facilities, shops ... The system features easy cleaning, high gloss and decorative appearance. The system is versatile and easy to install.

Layer Product
Thickness 1,5-2 mm
Substrate Concrete prepared according to standards
Primer C-Guard® EP 120 or EP 152
Intermediate C-Guard® EP 120 or EP 152 + sand
Final layer C-Guard® EP 300N
Optional C-Guard® EP 273W CLM
+386 41 750 720